jzeman17 Report post Posted May 30, 2020 Looking for some advice or suggestions pertaining to our icemaker. Recently narrowed the icemaker as the problem of the breaker tripping. If repair...would appreciate some leads for troubleshooting, I have searched the internet and have not found any info for this. If replace is the only option then I will try and track one down.....2006 40' Beaver Montrerey...Dometic frig Thanks for any assistance... JZ Share this post Link to post Share on other sites
wolfe10 Report post Posted May 30, 2020 JZeman17, Welcome to the FMCA Forum. Assume this is a stand alone ice maker-- please verify. What brand ice maker do you have? And, if you can post the model number that will help as well. Share this post Link to post Share on other sites
hermanmullins Report post Posted May 30, 2020 JZ, are speaking of the icemaker in your Dometic refrigerator or stand alone. If it is in you refrigerator I would replace it. It is 14 years old and is most likely cored. My suggestion is to pull it and take it to a refrigerator service center and they can match it up. This is what I did in our old nevercool before we replaced it for a residential. Herman Share this post Link to post Share on other sites
jzeman17 Report post Posted May 30, 2020 Thank you to both of you gentlemen for responding: Wolfe 10: here are some pics with information about the icemaker . Herman your remedy may be the only option I have....lol. Hopefully I will be able to find a compatible unit to fit the space. Share this post Link to post Share on other sites
wildebill308 Report post Posted May 31, 2020 The Kenmore ice maker M1 SA8868 is manufactured by Frigidaire for use in Kenmore refrigerators and others. The equivalent Frigidaire part number is 241798224. Look on Amazon. Bill Share this post Link to post Share on other sites
desertdeals69 Report post Posted May 31, 2020 My ice maker leaked in my Dometic so it gave me an excuse to go residential. Share this post Link to post Share on other sites
rayin Report post Posted May 31, 2020 Perhaps the wiring diagram might help, sorry it came through so small. And this pdf for testing the ice maker: Wildbill is right, I bought one off Amazon for $40. I drilled a small hole in the white cover so I could adjust cube size without removing the ice maker in my Norcold 1200LRIM. Share this post Link to post Share on other sites
