TNTraverler Report post Posted March 4, 2014 I am trying to find a replacement outlet cover plate (see picture) called Monaco but no help. Does anyone know where I can get one. Share this post Link to post Share on other sites
jrwitt Report post Posted March 4, 2014 That is an odd one. What is the round hole for? A week or so ago, I saw either at Lowe's or Home Depot some modules that could be put into the rectangular holes in a cover plate. I know there were things like Ethernet connectors and coax connectors. Not sure what else they had, but on a double plate, you could put a 120V double outlet on one side and the other stuff on the other side. Or you could put modules on both sides. I am going to Home Depot tomorrow morning and I will check again. Does that odd round hole need to be there? The modular stuff could hold 2 or (I think) 3 modules and they don't have to be the same type. For example: you could have Ethernet in one position, coax in one and telephone jack in the third. Does this sound like it might work? I'll let you know what I find tomorrow. Share this post Link to post Share on other sites
sandyhepburn Report post Posted March 4, 2014 Not sure about the rectangular hole, but the round hole looks like it would be for a 12VDC outlet - aka cigarette lighter or 12VDC power port. Share this post Link to post Share on other sites
hanko Report post Posted March 4, 2014 Go to an electrical wholesale supply house. Don't even bother with Home Depot or Lowes. Leviton, Slater or Hubble will have what your looking for. Share this post Link to post Share on other sites
rlbarkleyii Report post Posted March 4, 2014 Contact Monarco Corporate Customer Care and ask them who the provider of the part was and order direct. Since Monarco has changed hands so many time in the last few years, you may find there are no corporate parts history available for your year model. Share this post Link to post Share on other sites
dickandlois Report post Posted March 4, 2014 TNTraverler, By chance are there any numbers stamped on the back of the cover plate? I did find this one but the AC outlet opening is different, among other items, it might work by making some cuts in plastic for the existing connectors. http://www.lowes.com/pd_303128-63374-VH63R_0__?productId=3701836&Ntt=specialty+cover+plates&pl=1¤tURL=%3FNtt%3Dspecialty%2Bcover%2Bplates%26page%3D16&facetInfo= I did look into some Hubbell listings and they offer a number of different covers, however ! one would need to do some rework to make things, so you could get the proper covers for the items that exit the current cover. Rich. Share this post Link to post Share on other sites
