rlbarkleyii Report post Posted January 22, 2017 Need to replace the door restraint on my Winnebago Journey 02. Believe this door assembly was used on several models of Winny's over the years. Called Winny and they said they do not make the doors, and could not tell me who did so I could get parts. any one have any idea who might make Winny doors? The part I need serves two purposes, it is wedged between two fiction blocks inside the door and slides to retard the door from swinging wildly open. And it limits the travel of the open door to keep it from hitting mirror. Photo of part attached. Share this post Link to post Share on other sites
manholt Report post Posted January 22, 2017 RV junk yard. Surprised that WB don't have one in stock or don't know where to get it. Plasma fabrication shop. I had a rear bay door that had to be replaced, American Coach could make a new one in 6-8 weeks, the body shop that had coach, took it to a Plasma shop in San Antonio and a brand new one was picked up the next day for 1/3rd of the AC cost. Carl Share this post Link to post Share on other sites
hermanmullins Report post Posted January 22, 2017 Barkley, Good to hear from you, it's been a while. As Carl said said check for an RV salvage yards in your area. If none google RVSalvage, there are a number of them across the country. The one that come to mind for me is Colaws in Cartadge, Missouri. Herman By the way, nice pictures. Share this post Link to post Share on other sites
kaypsmith Report post Posted January 22, 2017 Bob's Used RV's Sales & Parts Inc High Springs FL Here is a pretty good one just off I-75 60 miles below the Georgia line. They have a large assortment, as they get most of the RV's that die on the way into Florida. They don't have a website, just paste the line above into Google search line, it will bring up yellow page info including phone# and address. Share this post Link to post Share on other sites
elkhartjim Report post Posted January 22, 2017 This information will possibly help. Part number128913-01-733 EA DOOR CHECK-SUB ASM ADJUST Vendor # V196-04 http://catalog.winnebagoind.com/menu/Parts.htm Share this post Link to post Share on other sites
manholt Report post Posted January 22, 2017 Jim S. I just looked at 02' Journey...everything but a front door latch! Carl Share this post Link to post Share on other sites
elkhartjim Report post Posted January 22, 2017 If you go to the 2002 WB Journey parts lists, door, it description is "door check". Share this post Link to post Share on other sites
manholt Report post Posted January 22, 2017 Sorry, my bad, I missed that part. Ought to make Barkley happy! Carl Share this post Link to post Share on other sites
elkhartjim Report post Posted January 22, 2017 Thats alright Carl but don't ever question one of my posts again. LOL Share this post Link to post Share on other sites
wildebill308 Report post Posted January 22, 2017 1 hour ago, Elkhartjim said: Thats alright Carl but don't ever question one of my posts again. LOL Good luck on that Bill Share this post Link to post Share on other sites
ClayL Report post Posted January 22, 2017 Who did you talk to at Winnebago? They do make the doors, I have seen them making them. They use the material cut out from the wall as the door and add trim etc. I would call Lichtsinn Motors , give them your Winnebago ID number (should be on a plaque by the drivers door) or your VIN which they can cross to your ID number. They are a few miles from the factory and do a great job of supplying parts. Share this post Link to post Share on other sites
rlbarkleyii Report post Posted March 5, 2017 Thanks Guy's , I have been off the net and the road for a while. DW was ill and not able to travel, Then Tranny and fuel pump problem, those resolved now, been trying to fix some of the little stuff that can be a pain in the neck. I will check out all your suggestions and post how i make out. Smooth Running to All! Share this post Link to post Share on other sites
manholt Report post Posted March 5, 2017 I sincerely hope that your DW is recovered from her illness and you can travel again soon ! Share this post Link to post Share on other sites
rlbarkleyii Report post Posted March 20, 2017 Took the part number for the "Door Check" indicated in parts listing, checked again with Winny and found out they want $75.00 plus S&H for this part. Haven't decided what to do about it yet. Still hoping to find used part or fabricate. Thanks to all! Share this post Link to post Share on other sites
manholt Report post Posted March 20, 2017 Any Plasma fabrication shop can duplicate it. However $75 is cheap, when you consider how long the other one lasted. Share this post Link to post Share on other sites
jleamont Report post Posted March 20, 2017 What's wrong with the current one? Yea, they are called "Door Check" or "Door Brake", depending on the manufacture. Share this post Link to post Share on other sites
