Jump to content

rfsod48

Members
  • Content Count

    792
  • Joined

  • Last visited

Everything posted by rfsod48

  1. rfsod48

    Shocks

    Is there any reason to favor one brand of shock over another?
  2. rfsod48

    Shocks

    According to Fleetwood I have Sachs shocks, can they be replaced with Koni or Bilstein?
  3. rfsod48

    Engine Monitor

    Since I have a stock engine, no EGT sensor, what would be the best to monitor on main screen? Coolant temp., transmission temp.?
  4. rfsod48

    Shocks

    Do diesel pushers have shocks that need replacing? If so is there an age limit or mileage that indicates time for replacement?
  5. Be sure you have enough fluid in the hydraulic pump holding tank. Roland
  6. Any suggestions on cell phone booster? I m using my cell as a wifi hot spot and would like to enhance the signal. Thanks, Roland
  7. rfsod48

    Engine Monitor

    Would that be the air intake temperature?
  8. rfsod48

    Engine Monitor

    Bill, I have a cat c7 engine, the scan gauge does monitor engine loading. Does this relate to EGT?
  9. rfsod48

    Engine Monitor

    Bill, So what do you do then? Let the speed fall off and go to lower gear? Roland
  10. rfsod48

    Engine Monitor

    Brett and Bill, If I understand correctly, the biggest issue with overheating is in climbing hills and not being in the correct gear to maintain correct rpm or higher rpm to increase cooling fan speed. My engine is unmodified. The scan gauge seen to not read EGT if I read their web site correct. Anything else that needs attention? Roland
  11. rfsod48

    Engine Monitor

    I have installed my scangauge and it works fine. Is the boost gage one of the Xgages that can be added or is it in the regular setup? I haven't Khadijah time to play with it yet.
  12. Bill, I would say you are south of Mansfield Tx. Near highway 157.
  13. Bill, Phoenix is great area! We stayed there last winter and never ran out of things to do and places to eat. Also like Tucson and Sedona . Roland
  14. I had my system installed 1 month ago and there was no charge. Works fine, had ac500 mile trip with it.
  15. rfsod48

    C7 Slober Tube

    I need to do modification on my slober tube. I have seen that some use jar attached to tube an others use extension tube to past bumper. Which is the better method or do they both work? Thanks, Roland
  16. rfsod48

    Engine Monitor

    Thank you both! I intend ot order a monitor today. Again, thank you for the info. Roland
  17. rfsod48

    Engine Monitor

    Is the port usually separate from the monitor that comes with coach? I don't have my coach here to look.
  18. rfsod48

    Engine Monitor

    Is the connector point the same one as the on board monitor or is there another one on the firewall?
  19. rfsod48

    Engine Monitor

    I am considering adding an after market engine monitor. We have a 2005 Bounder with the Cat C7 diesel. Any suggestion on what to get and about instillation. Thanks, Roland
  20. Moonwink, Thanks for the help! I ordered the phone tonight and hope to test it in the northern Michigan boonies this coming weekend. Roland?
  21. Has the 3G speed been a problem? Do you use a signal booster?
  22. Moo wink, Do you still like your hot spot phone? Have you had any problems? Do you feel the phone would be better or one of the mifi units? Thanks, Roland
  23. Bill, Any suggestions for wifi that would meet my needs? 3-4 months a year with 8-10 GB per month. Thanks, Roland
  24. Anyone still using this service? I am interested in a service for about 3 months a year and 30-40 GB.
×
×
  • Create New...