erniee

I wish that was my wanderlodge that was there. Too dang hot here in Texas

That or a towel- I hate leather!

I carry another 50 foot 50 amp- which I am currently using here at the fairgrounds in Livingston, Mt

YUP- done a bunch- check my profile

I believe those planks will work, as they are usually 3 feet in length and will cover the whole tracking length of slide.

You don't have to remove any slideouts when redoing the floors. That is just a big cash cow for the dealer. I know, I install floors in these coaches all the time. Instead of using those high priced slide slickers, go to a regular retail flooring store and get 4 pieces of luxury vinyl planks. Principal is the same- and you don't have to spend a bundle.

since this is in west Texas- its' all level-flat!

I'm 70 feet in length. I hope your roads are concrete and not caliche. My son is manager of Furgesons on Florida st in Midland. If you build it, we will come.

you must be able to access yours easier then I can do mine.

I ordered an enclosed Haulmark trailer and had the tongue extended to close to 5 feet. Never had a problem. The real deal is to aim your eyes high forward and plan your turns. Think big- like an 18 wheeler

If you are in the north side of Yellowstone, Livingston has the fairgrounds for 15 bucks a nite

We were looking at the amp draw on a unit just installed on my coach. At full cold- draws the 11 amps, even with the heater. At fan mode- just below 5- your thermostat doesn't seem to be wanting your compressor to engage.

When you go back with hard surface, it will be less in height then your carpet and pad. just keep it clean before you bring the slide in.

Karndean is a quality product. Do your rollers impact the main floor? What coach do you have?

Herman- that was before I had gray hair and less wrinkles then I have today. Crap- I always have had gray hair.

don't get laminate wet~

Bring it to Texas and I can do it. Would have to be after Aug, as I'm booked solid.

Don't be in a rush- enjoy the scenery. Livingston has a 50 amp campground at the Fairgrounds for $15 a nite. We will be there end of May

I added a Whirlpool to our coach- never had a problem.

Go to the bus nuts website- they have all converted buses there

I live in Weatherford and do inspections. I have been involved with coaches since buying my first in 1975.

Jack- your signature doesn't say what year your coach is. Your friend got taken. You don't have to replace rollers, take out slides to do flooring. That notion is a cash cow for the dealers. There are a few kinds of slides and how they articulate. One type- has arms under the floor and nothing from the slide touches the floor. There are rollers that are embedded in the floor and the slide glides over them. Then there are slides that have rollers on the slide and roll over the floor. Then there are Teflon slide pieces that impact the floor. Then- there is a combination of all the above. WHEW

YUP- what Mike said

Vinyl planks- glue them with manufacturers recommendation adhesive- not peel and stick. I use Mannington Adura.