wildebill308

This isn't rocket science. If you are concerned with dual spacing, go take a picture of the spacing. You could actually measure it. All the modern dual setups I have seen have plenty of spacing. A 0.4" change is so minor as to be not a issue. I doubt the average mechanic could repeat the same measurement with a +/- 0.4 accuracy. Bill

You just need to use the right RTV Silicone sealant/adhesive. Do your prep right and it will outlast the RV. Bill

more fixes happen with more information. Like Brett said twice. Bill

That is pretty close. The other consideration is to get the proper load range. What coach do you have? See it would be easier if that info was in your signature. Bill

Yes, too true. Now that I know to look at the overhang when I see a A or C coach it sometimes amazes me how much rear overhang some have. Some look like if you jumped up and down on the rear bumper you might lift the front wheels off the ground. Not picking on the gas coach crowd but it is something to be aware of when shopping. There are some out there that are nearly at their GVWR. Bill

Quick search showed on the cutaways, Cab Rear to Rear Axle (in.) max 118" Rear Axle to End of Frame (in.) max 68.5". Pretty much anything over the shortest has been stretched. The max wheelbase is 176" This is what drives the problem because it is as long of a driveline as they build. If you want a longer RV you have to add to the rear overhang. Bill

Good to see you are still around. Bill

Welcome to the forum. If you put your coach in your signature it will help you get better/quicker answers in the future. See my signature to give you an idea of what I mean. Bill

Speaking of the OP has anyone heard from Mr Keon? Bill

lonnemays, Welcome to the Forum. Yes, I would highly recommend a good reading of that Hartford RV insurance policy. Bill

Is this a front / steer tire? Bill

What power source are you plugged into 30 or 50 amp? Have you checked to see if you have 120 V power in the coach? Are you talking about the circuit breakers? Bill

The first place I would look is the owner's manual and call Keystone. I would have the serial number handey when I called. With out more info I can't find the correct information. There are lots of videos on YouTube. Bill

Just a few minor beauty marks. Bill

What you need more than other Tradewind owners who have switched tire brands is to go bookmark the link that FIVE posted. Then you can compare your 235/80R 22.5 and find tires that are close to the original size. The tires that DD posted about are close enough to work. Bill

OdellFamily, Welcome to the forum. Bill

Nice, be a shame to get snow all over that nice shiney coach. You should try parking it someplace warm like the Rio Grande Valley. Bill

So what is your point? ALL the membership was given a chance to vote. Bill

I remember that the proposal was presented to the membership and receives a majority approval. So how was this "forced upon the membership"? So you don't/didn't believe in the club enough to support it full time Yet you are so outraged you are threatening to go join a club that is pretty much the same but with lesser benefits. I am wondering where are all the terabil changes are that you allude to. By the way I was in Minot, ND I didn't see any big changes also at the 6 State in Shreveport, LA. No changes and I didn't see you at ethir event. The bottom line is the RV lifestyle should be about the people not the RV they show up in. Bill

Wow!!! DBenoit has strippers working on his roof. No wonder it is going to be expensive.... Bill

Yes it is important to give all the money raised to the intended purpose. Only about 40% of the money raised was going to the intended purpose. One of the great things about Texas is the early voting. I think early voting is the best thing they have done for voters. No need to worry about geting to your assigned polling place on election day. "Any registered voter may vote early by personal appearance (in person). Early voting by personal appearance for the November 5, 2019 Election begins on October 21, 2019 and ends on November 1, 2019. You may vote at any early voting location in your county of registration." I voted today. Bill

But how many understand and will vote? Bill

Thank you for supporting Prop 5. Bill

I think I saw how to do that on Youtube. In Texas vote yes on Prop 5. Bill

My guess is that all the outher Cummins engins with cylinder liners require SCAs so it is cheaper/easier to just stock the one coolant. Bill