Jump to content

manholt

Members
  • Content Count

    12641
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by manholt

  1. Rick. Welcome! Mine gave a clunk sound, turned out that I had a bad battery, Changed out all my acid batteries and installed AGM's...my clunk has not come back! If yours is acid, when was the last time you looked at water level? If they are low, add distilled water only! Carl
  2. Wayne, the way I heard it, "PC" had it's funeral in the White House, January 20th. "Lemon", is the word your looking for!
  3. Your coach all electric, no propane? Mine is!
  4. Joe. Your right about consumers problem, but how else do you rearrange things without spending $$$?
  5. Joe, you don't need 7 years of bad luck ! You already have 3 women.. Carl
  6. That's what they did with both of my banks last year, also set the discharge % on Inverter...2, 4000 w Magnums. Carl
  7. Puff, that's great news! Stay warm and I'll cross my fingers on your generator...you might just have had a piece of dirt in your fuel line or the Gremlin died. In any event, it's been fun reading about your journey! Give Hana my best and hope she'll dance the jig soon! Please, continue posting...
  8. You can also, buy stencils and spray on frosting...Rustolium has it in a spray can, then just remove the stencil !
  9. WBill. Had my useless door awning removed and holes patched, will paint tomorrow...fascia replaced on dishwasher. Coach is running good, nothing wrong with it. I'm having Boggy lights installed under coach (red, white and blue) in Chandler, AZ. When I get back to Texas, I'll have all my running lights, including head lights and tail lights replaced with LED! My roof is dry, so I'll have it painted. Carl
  10. Vince. I understand your frustration! But all your anger is to no avail...CAT is still facing millions if not billions of dollar law suits over that engine, nothing you can do about it...Sorry! Send a PM to jleamont, he might have some ideas, that I do not. He's an expert on those engines, so is Brett Wolfe (aka Wolfe10) pick their brains via a PM. Carl
  11. Welcome to the Forum! Any reputable propane dealer will do it...I would get a new valve installed. Carl
  12. WBILL. That's why Wayne and I got stuck in Big Bend....a lot warmer, betcha! I'm in Pipe Creek and it's 76!!! Cool nights, warm day's.... Carl
  13. Ditto! Wonder what happened to my other 3 reply's? Carl
  14. If it works as a countertop or floor, it will work on a wall ! My backsplash is the same tile as the floor! Carl
  15. It's brock, can you see the lines going in/out of switch, or is it covered by a flimsy metal cover? if the later, you need to remove cover in order to replace switch, some manual switches will have a screw or allen screw, so you can remove the handle from shaft, then there might be a small screw holding a piece of the cover in place over the valve, so you don't have to remove the whole panel...pray!
  16. Is that like a long handle that you move from horizontal to vertical? I have had to replace them before, it's a ball valve and most are plastic, I replace with stainless steel, that I get from ACE hardware...you pay for what you get. If it's electrical, I would think the switch is bad and not sending a signal to ball valve open/close...I'm guessing it's a manual switch. Carl
  17. Another thought, you should have a switch or on/off lever for a ball valve in your water compartment, that diverts water from your water pump, when your hooked up to city...separate from tank fill. Carl
  18. Do you have a water reel? or just a hose that you connect to spigot and coach? When you say nothing comes out, what exactly are you referring to? Have you turned on spigot without hose attached...just to make sure you have water in? Carl
  19. Brett. You quick...Ramona, not so much! Carl
  20. Jim. Thank you for the follow up and this last bit of information! Thank you for your service.... Carl
  21. Wayne, I carry a PT 50 C that I got in 07. I'm hard wired from factory, but I'll still plug in to the portable on occasion (like Chandler FMCA portable generators for 30/50A.) Got another PT 50 C at my hunting/fishing camp! Carl
  22. As BillA wrote. Read your owners manual, it will explain what the different acronyms mean! There are also other factors involve and that is in the manual as well. If you don't have a manual? Call Newmar Tech Department with your VIN # and you can get a copy sent to you or downloaded. Enjoy your coach and safe travels. Carl
×
×
  • Create New...