huffypuff

Usually when the turn signals blink fast it is a lack of resistance or bad flasher. Bad bulb or LED bulb use comes to mind. If LED bulb is use you have to add a inline resistor for each bulb. If that isn't the problem try using a heavy duty electronic flasher.

You do what your manual says to deploy the slides then do the reverse to bring them in.

Wow, 2 weeks without a toilet, glad you got it fixed. You can go now.

When HR hung the MW it appears that the filler was made to one size. They are going to make it fit no matter what.

Got some updating going before Quartzite the first is to organize soda cans These racks organize 48 cans all together. DW like it so much that she wants some for water bottles. Sorry these are for cans not tall bottles. The microwave/convection oven started tilting down at the front and had to be relevel if it was ever level. It was down in the front 2% and 1/2 brought it back to level. I installed brackets where there was none. HR thought shooting a couple of screws underneath was good for down the road. Now the filler panel that goes over top of the MW needs to be cut down from 7 to 6 1/2 inch. I was going to use that space for spice rack but the cats jumped into that space twice. We had to stuff a couple of couch pillows into that space to keep them out. You can't turn your backs on them for a second.

I don't know if it's a stand alone or network version you have but mine requires the RCS50 control panel and ME-AGS auto start network module. Then everything programs from control panel. It all depends where the auto start module is weather or not it will be easy to wire.

Also for the PSW to work you may have to upgrade the RC50 as it may not have the right programming in it. May be better to go with ARC50 if you want to install auto gen start later.

That means I saved almost $400 last summer and I used the saving to install autostart with cash to spare. 😎

Instead of getting new tires covers at the Western RV rally I got them from Amazon for only $30 for all 4. Delivered and installed today. Reflective aluminum skin. https://www.amazon.com/gp/product/B07GSWKYZ3?ref=ppx_pt2_dt_b_prod_image

What item on your list is 120v and 12v?

I don't know about 2000 model year until the body control module is checked with the Encore. I know newer models has to be added with the j-tool through Ford website paid subscription. .

When the charger went out on my inverter the factory repair was more than replacement with a new one. I went with the same because I have a 2006 coach not a all electric coach made today. I was able to work 2 smart TVs with it. When unplugged from shore power what works when pressing the inverting button is the only things running on inverter power. Ours have 2 circuits (legs) protected by 20 amps each. We don't have the crazy electronics to work slides, shades, water pump, and other items. The rest is either 12 volts or runs on 120 shore or generator power. We can upgrade our older coach but never be a new modern one so why put in a item that in don't need?

Magnum Energy ME2012-20B ME-Series 2000W 12VDC Modified Sine Inverter/100 Amp PFC Charger

Great, because DW put a lock on my wallet until Quartzite. I will order them then.

When I replaced the charger/inverter in my coach this summer I went with same make and model. There are many software updates and performed fine for 13 years. All electronic worked great before and should work just as well if not better with the new one. It inverted the microwave and 2 smart tv as well as other outlets before and after just fine.

Yes, Good Sam Platinum Complete Roadside Assistance does that also

The propane truck made it here today and it took 31.1 of it's 31.2 rated capacity of a 39 gallon tank at 80%. They only come here once a week and was swamped because of the cold weather during the holidays. That's why he wasn't here last week. We survived lately by blowing the chill off in the morning with the two heat pumps and using the microwave/convection to cook. ShadePro came yesterday and replaced the soft connect to the awning. It is more of a plastic now instead of vinyl so it should last longer than the old. We are going to the Western area rally in Indio, CA tomorrow. We are pricing replacing the pleated shades we hate with roller shades for ten windows. https://wafmca.com/?page_id=167

Here is the link for the Good Sam Platinum Complete Roadside Assistance. Yes it does cover the cost of tire and wheel up to $750. https://www.goodsamroadside.com/findaplan/platinumcomplete.cfm

jleamont diagram is correct as wired as a pair of 12 volts as my coach house is wired. Except I didn't cut the end positive cable when I posted it on the internet. 😂

The big increase is to cover wheel and tire replacement.

Yes there is one not far away doing day hours but dw don't want to as the spots are tight here

seems like this delivery truck is the only deal in town. We are in CA so you can bet the electric rate is high. I heard as high as .24 kwh so I have to pay through the nose.

The propane truck didn't make it here yesterday even Though talking to the office he said he would. The truck is due to come around next thursday. That will make it two weeks without propane.

I'm ok with diesel fuel, it's the propane tank I'm talking about.

OK I'm still trying to figure out how I ran out of propane. With the horizontal tank I experienced the point of diminishing returns. The gauge reads F, 2/3, 1/3, E. Full is really 80% not 100%, 2/3 is really 50% not 66.3, 1/3 is really 20% not 33.3 and empty.is practically nothing at all. It's a wonder we got 4 days out of it before depleted. Yes we had a call into the delivery truck as soon as it went empty. There is another reason that made it empty so soon when it hit 1/3. The gauge measure liquid level not amount of propane left. So a round horizontal tank would have very few gallons left at 20%. The tank is a 39 gallons and 80% is 31.2 gallons. The gauge is wacked to begin with as full is only 80% so it goes down to 2/3 very soon. It takes much longer to go from 2/3 to 1/3. After 1/3 very little left. Full is 31.2 gallons and 2/3 is 24.2 and 1/3 is only 7 gallons. We have to take into account the tank is round. 1/3 (20%) would be the minimum the tanh should be allow to go.