manholt

Would your coach be a Gulf Stream?

Bill. No, just that it's the gears...they stopped makeing my unit in 2006, the year of the great meltdown was 2007! Wayne. Could be, for you and me! LOL Herman was in High School. 🤣

Wayne. When my unit was built, you was a alter boy! I have no track, only a 2 drive motor, 3 rollers and a horizontal drive bar held in place by a SS bolt/nut on each side of the motor. Rich, thank you for your help...it was process of elimination that brought us to the gears! 😁Enjoy your biopsy tomorrow. You'r health is in my mind all the time!

Rich.,, We have done everything we can do. Just tried it again and the slide jumped & that would indicate a gear problem! Linda called a friend who does slides for a living, he confirmed your guess about the gears...he'll be here in time for breakfast, lives at ranch down the road...Labor day rate is $300 an hour & $500 service call...tomorrow, $80 an hour! He will bring a new motor. $387, mine is 14+ years old. We have Dove season!!! e

There was no pages beyond 16. Now we have another problem, we have a meeting with my Atty Wed. in South Houston...Suppose to flood there tomorrow! One thing after another...just started drizzling here!

Rich. Motor # is 510000078, S/N 8U0002

Rich. We found the controller in bay with motor. It's a, LF326 1510000013REVOB 25Amp with a inline white fuse # A/125VP.

Question. Does it run of engine batteries, I have 2. or one of the house batteries, I have 8?

I'm reading it. 1. We have not found a controller yet. 2. My switch has no key or on/off position, just in/out. 3. My slide outs work on AIR level, current or Jacks. 4. There is no brake release lever on or near motor.

In my coach, that would be once a day...It takes me 5 days to get from TX to CA and 2 fuel stops!

Rich. After more inspection and spending 3 hours on internet..Sorry for miss information! None are hydraulic! All four are motor driven elect. One problem might be weight...unit is for up to 400 pounds, slide has sofa, convection/microwave, stove with corian and tile back-splash and the residential fridge! 😟

Wayne. Your right, there hast to be a controller, probably in the battery compartment or OMC compartment next door! Daylight I will look, at least that slide works! Jim S. You can expect a call..I figure you can be bribed 😁

Welcome. You get a medical?

Ditto, X3! I thought B&J was bought out by Dwyers, several years ago! During Mardi Grass, Blue Bell makes a "Double cream praline"! Decadent. Kay. Linda is on one shot a day, can't keep her away from ice cream & Napoleon's in Norway...I'm scared to take her to Belgium or France!

Rich. I wish it was HWH system!!!! It's Power Gear by Lipper Ind. Same as my Jack/Air leveling system. Interior of coach is level, will see if I can round up some muscle this morning. Got to get this fixed by the 13th! Otherwise, it will be Linda's DP going to Shawnee, OK. WBill. Linda did. We both crawled into 2 bays to look for obstructions and motor. There is a black wire that's connected in casing of motor and has a 3 female connector on it...have no idea what's it's for! Wayne. No...just a rocker switch for in/out...

Just now, tried again and it's 3" in out. Got full capacity on all 10 batteries!

Yes. Make sure that nothing is on...Too late for 4th of July!

You got it...looks the same as it always has, not canted or high/low. Normally, I would say low voltage, but meeter say 12.7...no loss of fluid. It's like, it has not got the power to get over lip!

Brett, thanks...I got one on each inverter.

Rich. I have 2 electric hydraulic slides...the rear works, front don't, when it stops, the motor is still on, but slide will not lift up and then go in! The other 2 slides are electric only and work.

Your 44 is all electric?

29' to 36'..what's yours!

Mike, I don't even feel that stretch and my Wrangler don't move side to side! I have seen TT's fish tail, never a toad.

Yep! I found it...did not read or download PDF.

No switch, Lipper Power Gear System, hydraulic...no leaks. Got me by the short hairs! Motor runs, bar turns...rear one is working fine.