wayne77590

And back at you and everyone else.

What antenna on the MH do you have for the Hopper and is it the Hopper 3?

I believe Coleman makes a replacement AirXcel model.

My brother lives in Central Mass and we have looked all over Mass. for suitable CG's and, except for what I hear about Normamdy, there are not good CG's in Mass. We have been all over looking for one within an hour or so ride from family and gave up. We would not stay at any of them. We have heard the Normandy Farm park is good.

Had a roof replaced a few years ago on our 2008 after hail damage. Cost the insurance company $19,000.

As expected, and thanks for the update. Another fine place is Houston Freightliner just down the road from Cummins but reservations would be necessary with their backlog. I believe they are now an Oasis Shop.

I have family in New England and we always take I-84 across the Hudson.

We have been to the Left Coast several times going in at San Diego or Oceanside. We have traveled The 101 every time in a 40' towing a car and have never had a problem. In Calif., if towing, the speed limit is 55 and is reasonable as far as we are concerned. We have taken several side trips on the PCH in the toad and would never take a 40' towing on that highway. Stopping at CG's along The 101 and side trips are the way to go. If you can plan it, stay around Ferndale, CA., and take a side trip in the Toad along the Lost Coast Hwy. Start in Ferndale and take Mattole Rd down to Petrolia. Little restaurant/tavern on the left going in. Stop for a sandwich. Continiue on Mattole Rd and it will take you through a part of the Humboldt Redwood State Forest and back onto The 101. Head back to the RV. Great side trip but don't try it in the MH.

Ha ha! So do I.

According to their web site, "Maryland weigh stations require all trucks over 5 tons to weigh." My motorhome is not registered as a truck.

Left lane?

Yes, along with Kwikee and a lot of other components. They have gotten real big. I just had some work done there a few weeks ago when a Power Gear motor was failing. They were able to work me in at 0700 on a Monday. BTW - If anyone needs any repairs/replacements, Master Tech RV in Elkhart are great to work with. The have a very large place, all inside. One of the owners having repairs done said they could stay in their MH hooked up to power in the evenings. Their hours of operation for repairs are 0700 to 1530 hours.

PowerGear uses the rack and pinion also. The motors run off 12v provided by the controller. The controller keeps the motors in sync. Load sensing stops the motor. Interested in hearing what you find out.

Byron, Every single day will be an improvement day. She'll feel it in the the therapy sessions. Tell her to use the cane for balance and just in case situations. Happy to hear all is going well.

Call Lippert Components Inc., as they now own Power Gear and what you are basically describing could be a Power Gear rack and pinion type system. Not positive on this with a Tiffin though. If the "rack" looks like a serpent it is a Schwintek. If it is a straight rack with teeth it is Power Gear or other than Schwintek, me thinks. Calling Tiffin with the coach serial number and ask who makes the slide motors and controllers that were put in it is going to help. Power Gear and Schwintek controllers can be used for either type if that is what they were using in 2007. If the controller looses its memory it can get out of sync and needs to be reset. Waiting to hear what you find out from Tiffin.

I just have to ask. Are you using RV(septic) safe toilet tissue? Also no Kleenex type tissues in the toilet? You may know this already but if you take a square of toilet tissue and drop it into a glass of water it should break up and sort of dissolve to nothing.

After the costs you are going to incur for repairs and no guarantee the repairs will last a long time it may be time to replace the unit. A Coleman Mach 8, 13,500 Btu can be found for under $1000, and closer to $800. What are the repair costs for you now? We have 3 AC units on the roof. We left Texas June 10, 2018, and went to Florida, then up the East Coast. It wasn't until after we left Fort Belvoir, VA, that the temperatures were below 95?. If we tried running all 3 AC's the 50 amp pedestal circuit breaker would trip so we just stopped trying to run all 3. The ceiling fan in the bedroom helped circulate the air from the front two AC's and were were very comfortable in the low 70's inside the MH. This time of year you should not have any problem staying comfortable.

I recognize that and can add that mine sometimes talks to be using sign language gestures.

There are some states where it is illegal to wear headphones or ear buds while driving. Motorcyclist typically wear a helmet with a built in system. Don't know about the legality of that.

Aw Carl! I'm sorry. I should have realized that Kay and I were most likely having a private exchange of information not suitable for virgin ears.

Byron, Back in or aroumd 1970 or so I had my first CB radio. Can't remember the name but it was a tube type antique, maybe now but not then. I went to Syracuse University Research Center for some testing and evaluation of radio equipment. One of the tubes gave out i the CB and I was explaining to the engineers there what I had. One of the engineers said to bring it in and he would change the finals out to transistors. I did, he did. Then to test it he took a metal coat hanger, cut it to about 19 inches, stuck it into the RF Output connector and started calling. Got a couple replies from passing motorist and said I was good to go. In todays world we still call it "Antenna Theory." I spent 3 years in GTMO before I got my= ARC sign. Took some RG-8, took of the insulation with the length removed corresponding to the center frequency of the CB band, skinned the shield back down over the insulation to act as a ground poise, hoisted it up into a tree and communicated many a day by "skip" back to the states. Antenna Theory - we are still learning, but there are things that are proven to work.

The operation is only about two hours and PT is 6 to 8 weeks. My bet is on PT being extremely important. Don't be a nurse, Betty, just do as the PT person says to do - no more. It's not going to get better faster by doing more.

Chipped, cracked, even when trucks are approaching from opposite direction and in their lane. Angle of the dangle when the truck hits a pebble in the road, or force flies it from the tread of his tire Nature of the beast and not really something that can be protected.

With both my ACL, right knee replaced and two rotator cuff repaired the only time I took the hydrocodone was about an hour before physical therapy and that was only for a few weeks, then nothing. My pain threshold is high. To explain that, I don't take novacain or gas when I get a tooth filled. I also had a root canal without anything. Last colonoscopy I did not take anything and I can tell you this - next dang time I will,

...and GFI receptacles are polarity specific and are usually marked + and -, hot and neutral. If the wires are crossed it will never reset.