Jump to content

wildebill308

Members
  • Content Count

    8100
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by wildebill308

  1. Yes, it is slow. I tried to get the FNCA management to promote it more. Many people don't know about the forums. Bill
  2. Is it a gas coach? What brand chassis? I would think any large dealer that handled bigger trucks should be able to do it or tell you who does it for them. Let me know what you find out. Bill
  3. That sounds like the likely problem. Yes I would have it checked before trying to start. Let us know. Bill
  4. I agree with what Carl said. Also stop every couple of hours to get out and walk around. Bill
  5. Have you looked for Continental's? Bill
  6. With the Cummins software does everything/all functions quit if the Key times/runs out? Bill
  7. We will be in Tuesday 22. We are at High Chaparral RV Park 7575 W Battaglia Dr, Casa Grande, AZ 85193. I won't be parked with Aim as I got full hookups. But I will find the Aim tent. It was a little cool. Supper was the usual, a beef dish chicken and usual sides. They had a couple nice dishes for desert. All together with the open bar it was pretty good. Bill
  8. What was your water temp when this happened? I dought the " first time I used Power Service cetane booster." was a problem. I have used it every time I fill up. Do you know what your EGT was when this happened? Bill
  9. wildebill308

    Screw In Tire

    Yes I would do what Herman said. If you have a problem you are where they can fix/replace it. Bill
  10. Will pass that on. Had a fun night. Supper on the flight deck of the USS Midway with a band. Did you know this is the 100th anniversary of the launching of the first aircraft carrier. Pretty cool way to celebrate it. Bill
  11. I agree, To much cost cutting that realey hurts them in the long run. Joe, Hear is a problem I heard about at the rally. Person has a Parshall derate He is Only getting about 55% engine loading and about 5-8 psi boost.(this is under load on a hill full accelerator) How ever it will on occasion go to 85-98% loading and 20-25psi boost. Yet it will drop back to the earlier rating once it shifts. Any ides? That sounds higher than the Cummins package with the computer. Who makes /sells this one? Bill
  12. Have you called/talked to Inland Truck Parts & Service, 1299 Northeast Pkwy, Fort Worth, TX 76106. 1-817-626-7278 Or FleetPride 912 S Blue Mound Rd, Saginaw, TX 76131, 1-817-625-5244. Bill
  13. I heard because of fuel prices they were all going to stay in FL. this year. Bill
  14. I wonder how hard it would be to install. Bill
  15. You lasted way longer than I did. We left and headed West about the first of the March. Now about as far west as I can go on the San Diageo Bay. Bill
  16. NEVER replace a fuse with anything but what is suppose to be installed. Clean and polish all the grounds and treat them with a corrosion preventative. Bill
  17. wildebill308

    Tucson

    Safe Travel to you. We will be in the morning of the 22. Bill
  18. Welcome to the forum. I would put that 10K in the bank and use it for any repairs. I don't think any EW policy pays for maintence or any damage they can claim is from lack of maintence. Do you have proof all required maintence has ben done since new? Bill
  19. You can try sending him a PM but the post is from November 1, 2015. I would look at the post about it on the Cummins engine thread on irv2.com. that rayin posted about. Bill
  20. So did you take the connection apart and clean it and treat it with corrosion preventative so you don't need to go back up on the roof next week? Bill
  21. Why? How could you fill both black and gray water tanks daily? You have a while till you go in start practicing a little conservation in your FHP's site. Close your tanks and fil your fresh water and shut it off at the park hydrant. Dry camp at your site. See how long you can go till your tanks are full. Most people can go 3-4 days+. "until Sold Out" usually means you should pick a day 2-3 after you arrive and sigh up for service when you get there. They generally calculate how many sites they can do and when that number is contracted for they are sold out. Bill
  22. I didn't have on my Bounder but added one and a EGT gage. Bill
  23. Like Five said I don't see a problem outher than your lack of experience. I would hire a pro to do a inspection before I bought. Bill
  24. wildebill308

    Tucson

    WE will be there. Am looking forward to it. Bill
×
×
  • Create New...