wildebill308

I put Continentals on my last coach. Continental 275/80R22.5 HSR2 Eco Plus 5120850000 list price $616.30 FMCA price $418.52 load range H What load range are you running now? Bill

Welcome to the forum. That should be a pretty simple trip. Go north till you hit I-10 then go west to Houston. Pick up I-45 north. (wave at the Sam Houston statue as you go by) I-45 to I-20 then I-20 west. When you get near Fort Worth take 820 north (keeps you out of the down town area.) Follow 820 around to I-35w north. Go north on 287 when it splits off. 287 to Amarillo. Now you have at least 3 choices. You can go up 87/287 to Boise city where it turns into 385 to Lamar. Then it's 287 to Limon where you pick up I-70 west to Denver area. Route 2) from Amarillo, go west on I-40 to Vega then take 385 north to Channing, at Hartley pick up 87 north. Follow 87 till it runs into I-25. I-25 north to the Denver area. Route 3) Take I-40 west to Albuquerque then north on I-25. Little longer rout but I like ABQ.😁 Drove rout 2 this last summer. I have driven them all and a couple of variants. I don't see any big problems. Bill

What is the part number/model number? Have you tried the local sources or is this a warranty type issue. Bill

On the outher side of "smooth" we got to sample directly from the collector at the top of the still at Barton's. I liked the samples in the tasting room better. Bill

Not familiar with that product but I bet there are some epoxy products that will work on that type of plastic. I don't know how much it would cost to have a shop do a hot air weld repair but they have guns on Amazon for around $100.00 + https://www.amazon.com/s?k=hot+air+plastic+welder&hvadid=77653062753171&hvbmt=be&hvdev=c&hvqmt=e&tag=mh0b-20&ref=pd_sl_7y3qv1xc3o_e I would look at you tub and look for videos on how to do it. Then decide if it is something you want to try. Bill

Something different. Had anyone heard about the sale of RVillage? https://www.rvnews.com/rvillage-founder-discusses-sale/ Bill

Nice truck. Bill

I think that is the way I would go. Bill

Nice, welcome to the forum. What are you going to pull it with? Bill

You seem to be fixated on the carrier air v heat pumps as a heat source in cold weather. I will say again. You will never get any heat out of a heat pump if it is cold enough to freeze water pipes. I think it is strange your thermostat didn't automatically change to propane heat when it got to cold for heat pumps. My last coach a 2003 Bounder would do it. Hard to think a 2010 coach wouldn't do that. Bill

First I would find the end of the cable and see if it is broken or just pulled out of the bracket. Who makes the slide mechanism? Call them about a replacement cable and/or get instructions on how to route it and you probably can find someone to make a new one. Bill

Welcome to the forum. Help me understand. What happend to your 12 volt power in the coach? Both propane furnaces run on 12 volt power. Your house batteries should have provided power for at least a day to power the furnaces probably more, hopefully till power was restored. You will never get any heat out of a heat pump if it is cold enough to freeze water pipes. Bill

The first thing is to know exactly how tall your RV is. Not what someone at a desk somewhere thinks it is. You need to measure as ready to travel. This includes if you have air suspension or air booster springs. When you are headed under that low bridge is not the time to wonder "how tall am I". Keep in mind how long you are may affect your clearance if the dip in the road is fairly abrupt. Bill

Nice grill and welcome to the forum. I bought my wife a new cordless drill last week, I think she needs a new grill to. Bill

What/which low pressure alarm? Bill

So my scientific wild *** guess is it is the regulator going to the generator not giving it enough propane to stay running. Could be gummed up from non use. Bill

I would check for leaks and possible bad regulator on thee system. Does your stove work? Other propane appliances? Bill

gorgeguy, welcome to the forum. Bill

Yes your slides were designed with cabinets. The OPs Afa wasn't. and the OP ibgboh hasn't responded back yet. My recommendation would be to take it to someone who has experiance modafiing RVs. I wanted to know where he was so we could recommend someone to look at it. Bill

I am pretty shure it would take more than a month long stay in the area to see everything and visit all the wineries. Especially if you expanded the area out to include San Antonio. We did The Missions of San Antonio. https://www.nps.gov/saan/index.htm Verry interesting and the only World Heritage Site in Texas. We have done The LBJ ranch and birth place. and have stayed at Buckhorn Lake RV Resort, and The Vineyards near Fredericksburg. If you want to be closer to SA look at Admiralty RV Resort It is near Seaworld. Bill

Welcome to the forum. Never had a Alfa but Like Carl said "I see no reason why not". Where are you located? Bill

I don't anymore but when I posted that all the post were repeated. Glad it is fixed. Bill

What's with all the double posting?? Bill